Reiner jetStamp 790 Bedienungsanleitung Seite 72

jetStamp 790/790 MP
3. Set-up Module – Detailed access
3.1. Menu Entry
The Setup-Module has two sub-sections.
"SETUP - MODULE UPDATE" can only be used in connection with the 790 PCset easy.
"SETUP - MODULE SETTINGS" further extensive settings that influence the imprint and
handling can be carried out.
Press [MODE] until [SETUP] appears in the display menu bar.
f
Press [SETUP].
f
"SETUP - MODULE SETTINGS" appears.
Press [CALL].
f
"SM - SETTINGS" appears.
3.2. Selecting imprint
Proceed as in menu access (see page 49).
Press [NEXT] until "STAMP PICTURE" appears.
f
To set the required imprint number, press [VARY].
f
To increase the number value, press [INC].
f
To decrease the number value, press [DEC].
f
To move directly to the next menu item,
f
press [RETURN] once.
– or –
To save changes and to return to the main menu,
f
press [RETURN] three times.
The main menu appears.
70