Reiner jetStamp 790 Bedienungsanleitung Seite 74

jetStamp 790/790 MP
3.4. DOUBLE PRINT
DOUBLE PRINT is only available when using MP cartridges.
For an imprint with intense colour. Device stamps the imprints twice.
Proceed as in menu access (see page 49).
Press [MODE] until "DOUBLE PRINT" appears.
f
Press [CALL].
f
To activate "DOUBLE PRINT", press [ON].
f
To deactivate "DOUBLE PRINT", press [OFF].
f
To move directly to the next menu item, press [RETURN] once.
f
– or –
To save changes and to return to the main menu,
f
press [RETURN] three times.
The main menu appears.
3.5. Selecting cleaning interval
The duration until possible drying of the ink at the nozzles depends on the ambience
temperature and humidity. At the corresponding configuration, the jetStamp 790 performs
self-cleaning of the nozzles at regular intervals. Small amounts of ink are ejected here.
At increased temperatures and low humidity, the cleaning interval must be increased
accordingly.
Proceed as in menu access (see page 49).
Press [NEXT] until "CLEAN INTERVAL" appears.
f
To adjust the cleaning strength, press [CALL].
f
To increase the number value, press [INC].
f
To decrease the number value, press [DEC].
f
O = No cleaning
1 = Standard cleaning
2 = Mid-strength cleaning
3 = Strong cleaning
To move directly to the next menu item,
f
press [RETURN] once.
– or –
To save changes and to return to the main menu,
f
press [RETURN] three times.
The main menu appears.
72