Reiner jetStamp 790 Bedienungsanleitung Seite 66

jetStamp 790/790 MP
2. Using the jetStamp 790/790MP – Normal operation
2.1. Numberer
The numberer provides sequential numbering.
Imprints P : 05 to P : 07, P : 11 to P : 14 or P : 20 to P : 25 or customer-specific imprints
(see page 69) in which a numberer is contained must be selected (see "Selecting imprints",
page 70).
A second numberer can be inserted by a specialist vendor or the REINER support in
customer-specific imprints (see "Customer-specific imprints", page 69).
2.1.1. Leading zero setting
Leading zeros can be suppressed or printed, e.g 5 or 00000005.
Proceed as in Menu access (see page 49).
Press [NEXT] until "PRE CHAR 0" appears.
f
Press [VARY].
f
To display leading zeros, press [ON].
f
"PRE CHAR 0 ON" appears.
To suppress leading zeros, press [OFF].
f
"PRE CHAR 0 OFF" appears.
To save changes and to return to the main menu,
f
press [RETURN] three times.
The main menu appears.
2.1.2. Incremental/Decremental
The numberer can count incrementally or decrementally, e.g. 1, 2, 3 or 3, 2, 1.
Imprint P : 05 to P : 07, P : 11 to P : 14 or P : 20 to P : 25 must be chosen
(see "Selecting imprint" on page 70).
Proceed as in Menu access (see page 49).
Press [NEXT] until "MODE NUM 1" appears.
f
Press [VARY].
f
To increase the number value, press [INC].
f
To decrease the number value, press [DEC].
f
1 = Incremental
2 = Decremental
To save changes and to return to the main menu,
f
press [RETURN] three times.
The main menu appears.
64