Reiner jetStamp 790 Bedienungsanleitung Seite 65

jetStamp 790/790 MP
1.10. Installing 790 PCset easy-Software
1.10.1. System Requirements
Supported REINER devices
- jetStamp 790
- jetStamp 792
Hardware
- PC with Pentium processor (also compatible) or higher
- Graphics adapter with a min. resolution of 800 × 600 pixels
(at least 256 colours; optimal: TrueColor, 24 Bit, 16.78 million colours)
- RAM, at least 32 MB
- 10 MB free hard disc memory
- 1 free USB interface
Supported operating systems
- Windows 2000, Windows XP, Windows XP 64-Bit
- Windows Vista, Windows Vista 64-Bit, Windows 7, Windows 7 64-Bit
1.10.2. Installing Software
Installation is only possible with administrator rights on the computer.
Insert 790 PCset easy-CD into the drive.
f
If the installation programme does not start up automatically, start the file "setup.exe".
f
Observe the installation programme instructions.
f
GB
63