Miele PDR 914 SOM Gebrauchs- Und Aufstellanweisung Seite 97


Accessory parts may only be fitted when expressly approved by Miele. If other parts are
used, warranty, performance and product liability claims will be invalidated.
XCI box
The optional XCI box allows external hardware from Miele and other suppliers to be con-
nected to the Miele Professional machine. External hardware includes, e.g. payment sys-
tem, peak-load system, pressure sensor or an external vent flap.
The XCI box is supplied with mains voltage by the Miele Professional machine.
XKM 3200
The optional Miele communication module can be used to establish a data connection
between a Miele Professional machine and a data processor in accordance with the Ether-
net or WiFi standard.
The communication module is intended exclusively for commercial use and is supplied
with mains voltage directly via the Miele Professional machine. No additional power con-
nection is required. The Ethernet interface provided via the communication module com-
plies with SELV (safety extra low voltage) requirements in accordance with EN 60950.
Connected external machines must also comply with SELV.
Data protection and data security
When you activate the networking function and connect your appliance to the Internet,
your appliance sends the following data to the Miele Cloud:
- Appliance serial number
- Appliance model and technical features
- Appliance status
- Information about the software status of your appliance
Initially, this data cannot be assigned to a specific user and is not saved permanently. Data
cannot be saved permanently or assigned to a specific user until after you have linked your
appliance to a user. Data transmission and processing are governed by Miele's strict se-
curity standards.
Factory default settings for network configuration
You can reset all of the settings on the communication module or your integrated WiFi
module to the factory default settings. The network configuration should be reset
whenever an appliance is being disposed of or sold, or if a used appliance is being put into
operation. This is the only way to ensure that all personal data has been removed and the
previous owner will no longer be able to access the appliance.
Copyrights and licences
For the purpose of operating and controlling the communication module, Miele uses pro-
prietary or third-party software that is not covered by open source licensing terms. These
items of software/software components are protected by copyright. The copyright powers
of Miele and third parties must be respected.
Furthermore, this communication module contains software components which are distrib-
uted under open source licence conditions. The open source components contained in the
appliance along with the corresponding copyright notices, copies of the licensing terms
en - Optional accessories
97