Miele PDR 914 SOM Gebrauchs- Und Aufstellanweisung Seite 94

en - Installation
After the machine has been aligned, screw the nuts on the adjustable feet tightly to the

base plate using an open spanner.
Installing the machine on ships
On other types of floor structures (in cases where the machine is being installed on sea-
going vessels, for example), the fixing materials must be provided on site.
For installation on sea-going vessels, the machine must be secured to prevent slipping and
tipping by fastening it to the floor of the vessel (e.g. using clamps that are welded to the
floor of the vessel).
All 4 of the machine's feet must be secured.

Electrical connection
The electrical connection must be established by a qualified electrician.

The electrical connection may only be made to an electrical system provided in accord-
ance with all appropriate local and national legislation, regulations and guidelines. Please
also observe the regulations set out by your insurance provider and energy supplier, acci-
dent prevention regulations, as well as recognised codes of practice.

Reliable and safe operation of this tumble dryer is only ensured if it has been connected
to the mains electricity supply.
The required supply voltage, power rating and fuse rating can be found on the data plate
on the tumble dryer. Ensure that the supply voltage matches the voltage quoted on the
data plate before establishing the electrical connection to the tumble dryer.
Connection to a supply voltage other than the one quoted on the data plate can damage
the tumble dryer if the voltage is too high.
94