Miele PDR 914 SOM Gebrauchs- Und Aufstellanweisung Seite 108

en - Supervisor level
- Off
Service interval
The tumble dryer shows a custom message at a selected interval to prompt you to under-
take specific maintenance tasks.
Three different messages can be created: 1/2/3. Each message is created in the language
and alphabet of the current supervisor language.
Your message is displayed at the end of the programme and can be acknowledged with
OK . The same message appears at the end of the next programme.
Settings
This setting allows you to determine the interval (by hours or date) at which the message
appears.
- Factory default: Off
- By time
You can then select a time interval from 1–9999 hours.
- By date
You can enter a date.
Message text
Enter your message for your planned maintenance work. You can edit one, two or all three
of the 1/2/3 messages.
Reset display
The message appears until the display is permanently reset. The message then appears
again once the next interval is reached.
External applications
External exhaust flap
External hardware is connected via the Miele XCI box.
The time delay between the external exhaust air flap's activation point and the switch-on
time for the drum/fan motor is regulated.
A message appears in the display while the exhaust air flap is open.
- Factory default: Off
This option must always be selected if there is no exhaust air flap to activate. This pre-
vents the programme from being cancelled.
- On
- 0 seconds
- 1 second
- 2 seconds
...
- 300 seconds
108