Herunterladen Diese Seite drucken

Axkid ENVIROBASE Bedienungsanleitung Seite 15

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 18
Installing AXKID ENVIROBABY on the base
Pull the seat release handle (E) until it locks into its extended position (see F6). Place the car seat in position on top of the AXKID
6a
ENVIROBASE and push the car seat down into the AXKID ENVIROBASE until the seat release handle (E) clicks into locked
position and the set atachment indicator shows green. The bease attachment hooks (C) should now have attached to the car
seat in both front and rear.
Ensure that the AXKID ENVIROBABY is not in contact with any adjacent vehicle seat and that the support leg is firmly clamped
7a
to the floor and that the support leg installation buzzer (O) has stopped buzzing. Also make sure that the handle is in position A1
(see AXKID ENVIROBABY manual for further instructions)
IMPORTANT:
See your AXKID ENVIROBABY manual for full instructions on how to install the product and how to buckle your child in the seat.
Installing AXKID ENVIROKID on the base
Pull the seat release handle (E) until it locks into its extended position (see F6). Place the car seat in position on top of the AXKID
6b
ENVIROBASE and push the car seat down into the AXKID ENVIROBASE until the seat release handle (E) clicks into locked
position and the seat attachment indicator (D) shows green. The base attachment hooks (C) should now have attached to the
car seat in both front and rear.
Ensure that the AXKID ENVIROKID is not in contact with any adjacent vehicle seat and that the support leg is firmly clamped to
7b
the floor and that the support leg installation buzzer (O) has stopped buzzing.
IMPORTANT:
See your AXKID ENVIROKID manual for full instructions on how to install the product and how to buckle your child in the seat.
The Axkid module system
The Axkid Module system consists of:
AXKID ENVIROBASE – Base for easy installation in vehicles with ISOFIX connection points.
AXKID ENVIROBABY – Infant car seat for children between 40-75cm and up to 13kg.
AXKID ENVIROKID – Rear-facing car seat for children between 61-105cm and up to 18kg.
WARNING: Only install the AXKID ENVIROBABY or the AXKID ENVIROKID on the AXKID ENVIROBASE. Trying to use other products
on AXKID ENVIROBASE can result in serious injury in the event of a collision.
15
EN

Werbung

loading

Diese Anleitung auch für:

EnvirobabyEnvirokid