Axkid ENVIROBASE Bedienungsanleitung Seite 10

Thank you for choosing AXKID ENVIROBASE
Read this instruction manual before installing the AXKID ENVIROBASE in your vehicle.
For more information and installation videos visit www.axkid.com.
AXKID ENVIROBASE is a part of the Axkid modular system, and can be used with
AXKID ENVIROBABY - Rear facing infant car seat for children 40-75 cm and up to 13 kg, and
AXKID ENVIROKID - Rear facing car seat for children 61-105 cm and up to 18kg.
This is an i-Size Enhanced Child Restraint Module System. It is approved according to UN Regulation No. 129, for use in,
i-Size compatible vehicle seating positions as indicated by vehicle manufacturers in the vehicle user' s manual. If in doubt,
consult either the Enhanced Child Restraint System manufacturer (www.axkid.com) or the retailer
Important information
To maximize your child' s safety, it is important that you keep the following in mind:
• Always follow the instructions in this manual. An incorrect installation may seriously affect the safety for your child. If in doubt,
contact your retailer who can demonstrate a correct installation.
• Keep this instruction manual for future reference. If manual is lost, you can find it online at www.axkid.com
• Do not use AXKID ENVIROBASE and compatible car seats in a seating position where an active frontal airbag is fitted. If you still
wish to install the Axkid car seat in this location the airbag must be switched off according to the vehicle manufacturers instructions.
• Should you have an accident, no matter how small, your car seat should always be replaced. It may have damage that is non visual
and and could seriously affect the safety of your child. For this reason, Axkid does not recommend purchasing second hand car
seats.
• If the AXKID ENVIROBASE and compatible seat has been exposed to direct sunlight, make sure that the car seat is not too hot
before installing your child.
• Never leave your child unattended in the vehicle.
• Ensure that any luggage or loose objects are secured in your vehicle as they may cause injuries to passengers in the event of an
accident.
• Ensure that the AXKID ENVIROBASE and the car seat is installed in a way where no parts become trapped by movable seats, car
doors, etc.
• AXKID ENVIROBASE may only be installed rear-facing.
• Always make sure the support leg is in its correct position and have contact with the vehicle floor. Check that the indicator on top of
the support leg is green and that you don't hear any beeping sound from the support leg foot.
• Do not attempt to disassemble nor modify any part of AXKID ENVIROBASE. The warranty and and the safety performance of the
AXKID ENVIROBASE could be affected if doing so.
• Read the vehicle manual to find which seating positions are suitable for this base and compatible car seats.
• Axkid recommends to always use a seat protection to protect your vehicle seat from scratches and dirt.
• If in any doubts, contact the retailer where the base and compatible car seat was purchased or contact info@axkid.com.
10