Parkside PWD 12 B1 Originalbetriebsanleitung Seite 29

Maintenance
The device is maintenance free.
Storage
Always store the device and accessories:
• clean
• dry
• protected against dust
• out of the reach of children
Notes
• The dirt container is not suitable for
storing liquids. Empty the dirt container
after wet vacuuming.
Troubleshooting
The following table will assist you in fixing faults:
Problem
Machine does not start
Preparing the device for storage
(Fig. F)
1. Wind the power cord (10) around the
2. Insert the disassembled suction pipes
3. Wind the suction hose (13) around
4. Insert the nozzles into the accessory
Possible cause
On/Off switch (3) turned off Check the position of the
No mains power supply
On/Off switch (3) is broken
Worn out carbon brushes
Defective motor
holders (24). Fix the power cable using
the cable clip (11).
(12) into the accessory holders on the
feet (7).
the device and plug the handle section
(14) into a suction pipe (12).
holders (4) on the motor head.
Error correction
On/Off switch
Check the socket, mains con-
nection cable, plug and fuse
and have them repaired by a
qualified electrician if neces-
sary.
contact the service centre.
GB MT
29