Herunterladen Diese Seite drucken

Parkside PWD 12 B1 Originalbetriebsanleitung Seite 28

Nass-/trockensauger

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 4
GB
MT
• Nozzles
All
Vacuuming fine dust
Notes
• Never perform vacuuming without a fil-
ter!
• To vacuum fine dust, you will need an
additional fine dust filter bag (Spare
parts and accessories, p. 32).
Permitted filters and nozzles
• Filter
• Textile filter (16)
• Filter bag
• Fine dust filter bag
• Nozzles
• All
Blowing
Preparing the blowing function
(Fig. C)
1. Remove the filter and filter bag.
See Attaching and removing the filter
and filter bag, p. 26.
2. Push the suction hose (13) into the
blower connector (9).
See Attaching and removing the suc-
tion hose, p. 26.
Switching on and off
Preparation
1. Prepare the device for the desired func-
tion.
2. Fully unwind the suction hose (13).
3. Insert the machine plug into a wall
socket.
Switching on
1. Move the On/Off switch (3) to the pos-
ition "I" (ON).
Switching off
1. Move the On/Off switch (3) to the pos-
ition "0" (OFF).
28
2. Pull the device plug out of the wall
socket if you are leaving the device un-
attended or if you have finished work-
ing.
Cleaning, maintenance
and storage
 WARNING! Electric shock! Protect
yourself when performing maintenance or
cleaning work. Turn off the device. Pull out
the mains plug.
You should have any repair and mainten-
ance work that is not described in these
instructions carried out by our Service
Centre. Only use original replacement
parts.
Cleaning
NOTICE! Risk of damage! Improper
cleaning can damage the device. Nev-
er spray down the device with water. Do
not use any abrasive cleaning agents or
solvents.
Emptying the dirt container
1. Mount the motor head.
Place the motor head (1) with the top
facing downward.
2. Empty the dirt container.
3. Mount the motor head.
General cleaning
1. Clean the dirt container (6) with a
damp cloth.
2. Wash the foam filter (15) with warm
water and soap and let it dry.
3. Tap out the contents of the textile filter
bag (16). If needed, wash it with warm
water and soap and let it dry.
4. When full, replace the paper filter bag
(17) (for reordering, see Spare parts
and accessories, p. 32).

Werbung

loading