Parkside PWD 12 B1 Originalbetriebsanleitung Seite 25

before removing obstruc-
•
tions or loosening block-
ages,,
before checking the device,
•
cleaning it or performing
maintenance work on it.
If the device starts to vibrate
•
abnormally strong, an immedi-
ate inspection is required:
Examine for loose parts and
•
tighten these,
search for signs of damage,
•
replace damaged accessor-
•
ies. For repairs, contact the
service centre.
Cleaning, maintenance
and storage
Allow the motor to cool down
•
before storing the device for a
longer period.
Replace worn or damaged
•
parts in the interests of safety.
Use only original spare parts
and accessories. The use of
parts by other manufacturers
immediately renders the guar-
antee void.
The device may only be
•
opened by an authorised
electrician. Always contact
our service centre for repairs.
Switch the drive off, discon-
•
nect the device from the
power supply and allow the
device to cool off if you want
to clean, adjust, store the
device or to exchange an ac-
cessory part.
Handle the device with care
•
and keep it clean.
Store the device out of reach
•
of children.
Preparation
WARNING! Risk of injury due to un-
intentional start-up. Do not insert the plug
into the outlet until the device is fully pre-
pared for use.
Attaching and removing the
motor head
Disassembling the motor head
(Fig. A)
1. Unlock the locks (8) on the dirt contain-
er (6).
2. Remove the motor head (1).
Place the motor head (1) with the top
facing downward.
Assembling the motor head
(Fig. A)
1. Position the motor head (1). Pay atten-
tion to the direction.
2. Lock the locks (8) on the dirt container
(6).
Assembly
State on delivery
• Motor head (pre-mounted)
• Textile filter (pre-mounted)
• Castors (not mounted).
Mount castors (Fig. A)
1. Remove the motor head (1).
2. Place the dirt container (6) on a solid
surface with the bottom facing up.
GB MT
25