Master/Slave Operation With Several Light Sets; Remote Control With The Foot Pedal Fp-1 - EuroLite LED KLS-50 Bedienungsanleitung

Master/slave operation with several light sets

1
When several light sets are interconnected (→ 6.5), the slave units can be synchronized and controlled
with the master unit. For this select the desired operating mode (music control or automatic mode) at
the master unit and set each slave unit to a DMX starting address as desired (→ 7.3). The
interconnected light sets will now operate in sync.
2
When the master unit is to be controlled with the foot pedal FP-1, also select the operating mode music
control or automatic mode and set each slave unit to a DMX starting address as desired. The
interconnected light sets can now be operated in sync with the foot pedal.

7.2 Remote control with the foot pedal FP-1

The foot pedal available as accessory allows convenient control of the light set. Short actuation and long
actuation of the pedals.
1
Pedal 1 PRESETS – Preset colors, color change and color fade
• Repeated short actuation: for the following functions
Number
1
2
3
4
5
6
7
8
9
• Long actuation: color fade every 3 seconds
2
Pedal 2 SOUND CONTROL – Sound control and chaser
• Short actuation: to select sound control
• Long actuation: to select the chaser
Chaser
(speed 0.5 s)
Step 1
Step 2
Step 3
Step 4
3
Pedal 3 FREEZE – Freeze and strobe effect
• Short actuation: to select the freeze function. Then the current color is kept.
• Long actuation: to select the strobe effect
4
Pedal 4 BLACKOUT – Blackout
• Short actuation: immediately switches the LEDs off and on
• Long actuation: slowly (2 seconds) switches the LEDs off and on
Function
white
red
green
blue
cyan
yellow
purple
color change every second
color fade every 3 seconds
Spot 1 Spot 2
5 % 100 %
100 % 5 %
100 % 100 %
100 % 100 %
Spot 3
100 %
100 %
5 %
100 %
32/39
Spot 4
100 %
100 %
100 %
5 %
00081022.DOCX, Version 1.0