Operation Via Dmx Controller; Setting The Dmx Starting Address And The Number Of Dmx Channels; Dmx Protocol - EuroLite LED KLS-50 Bedienungsanleitung

7.3 Operation via DMX controller

For operation with a controller with DMX512 protocol, the light set is equipped with 20 control channels.
However, it can also be switched to a mode with 2, 3 4, 5, 12 or 15 channels if different functions are
required.

Setting the DMX starting address and the number of DMX channels

1
Adjust the number of DMX channels which are to be used for controlling the unit. For this press the
button MENU so many times until the desired value (e.g.
ENTER to confirm your setting.
2
To be able to operate the light set with a DMX controller, the DMX starting address must be set for the
first DMX channel. Use the buttons [▲] und [▼] to set the address and confirm your setting with
ENTER. As soon as the light sets receives DMX control signals, the red DMX indicator lights up in the
display and the set can be operated with the DMX controller.
Note: The starting address depends upon which DMX controller is being used. Please refer to the controller's
documentation. For operation with the DMX control panel DMX LED Operator 4 or the infrared system DMX LED
Operator IR2DMX adjust the DMX starting address 21.

DMX protocol

► 2-channel mode
Automatic mode, sound control, master control
DMX channel DMX value
000 – 249
1
250 – 255
2 000 – 225
► 3-channel mode
Preset programs, sound control, master control, speed
DMX channel DMX value
000 – 009
010 – 029
030 – 049
050 – 069
070 – 089
090 – 109
110 – 129
1
130 – 149
150 – 169
170 – 189
190 – 209
210 – 229
230 – 249
250 – 255
2 000 – 225
3 000 – 225
Function
Automatic mode
Sound control
Dimming from 0 – 100%
Function
No function
Program 1
Program 2
Program 3
Program 4
Program 5
Program 6
Program 7
Program 8
Program 9
Program 10
Program 11
Program 0
Sound control
Dimming from 0 – 100%
Running speed slow → fast
33/39
) is indicated in the display. Then press
00081022.DOCX, Version 1.0