Operating Elements And Connections; Mounting - EuroLite LED KLS-50 Bedienungsanleitung

4.2 Operating elements and connections

1
Fixation screw
2
QuickDMX input
DMX signal input (5-pin XLR) for connecting a
wireless DMX receiver. The connector provides the
required 5 V operating voltage.
3
Jack DMX OUT
DMX signal input (3-pin XLR) for connection to the
DMX input of another light effect unit.
4
Jack DMX IN
DMX signal input (3-pin XLR) for connecting a DMX
controller.
5
Connector for the foot pedal FP-1
6
Sensitivity control for the microphone
7
LED display
8
Jacks POWER OUTPUT
IEC jacks for power supply of further devices.
9
Power input with fuse holder
• Used to plug the supplied power cord in.
• Only replace the fuse when the device is disconnected
from mains. Only use fuses of the same rating and
power. The correct value is specified on the device.
10
Microphone for sound-controlled operation
11
Control buttons
12
Mounting bracket
13
LED spot 1 to 4
14
Connection cable for the control unit
15
TV pin for placing on a stand
16
Fixation screw
26/39
00081022.DOCX, Version 1.0