RIA45
Expert menu
Decimal places
Damping
Failure mode
Fixed fail value
Namur NE43
Allow reset
Output
The following parameters are available in addition to the parameters from the Setup menu:
Analog out 1 / 2
Fail mode
Fixed fail value
Relay 1 / 2
Time delay
Operating mode
Failure mode
6.5
Device configuration
Detailed information on the device configuration can be found in the operating instructions.
Endress+Hauser
Description
Decimal place for analog input
Damping
Failure mode
Fixed value in the event of an error (only, if Failure mode =
Fixed value)
Error limits according Namur
Allow reset of min/max values via Display menu
Outputs
Analog output 1 / 2
Failure mode
Fixed value in the event of an error (only, if Fail mode =
Fixed value)
Relay 1/2
Switching delay time
Operating mode
Behavior in the event of an error
Operation
45