Endress+Hauser RIA45 Kurzanleitung Seite 44

Operation
Setup menu
 Relay 1
Assignment
Function
Set point
Set point 1/2
Time base
Hysteresis
 Relay 2
See Relay 1
 Back
*) Is only displayed if "Application" = "Diff pressure" is configured.
Diagnostics menu
 Current diagn
 Last diagn
 Operating time
 Diagnost logbook
 Device information
 Back
Expert menu
 Direct access
 System
Access code
Overfill protect
Reset
Save user setup
 Input
The following parameters are available in addition to the parameters from the Setup menu:
Analog in 1 / 2
Bar 0%
Bar 100%
44
Description
Relay 1
Assignment of value to be monitored with relay
Operating function for relay
Set point for relay
Set points 1 and 2 for relay (only, if Function = Inband,
Outband)
Time base for gradient evaluation (only, if Function =
Gradient)
Hysteresis for relay
Relay 2
Return to main menu
Description
Current diagnostic
Last diagnostic
Operating time of the device
Diagnostics logbook
Device information
Return to main menu
Description
Direct access to an operting function
System settings
Protection of operating menu by means of access code
Overfill protection
Device reset
Save settings made in the setup
Inputs
Analog input 1 / 2
Lower limit for bargraph of analog input
Upper limit for bargraph of analog input
RIA45
Endress+Hauser