Icons In The Editing Mode; Quick Guide To The Operating Matrix - Endress+Hauser Ria45 Kurzanleitung

RIA45
In the event of an error:
The display shows:
Underrange/overrange:
In the dot matrix section, the error and channel name (TAG) are specified.
6.3.2

Icons in the editing mode

The following characters can be used to enter user-defined text:
'0-9', 'a-z', 'A-Z', '+', '-', '*', '/', '\', '%', '°', '2', '3', 'm', '.', ',', ';', ':', '!', '?', '_', '#', '$', '"', '´', '(', ')',
'~'
For numerical entries, the numbers '0-9' and the decimal point are available.
Furthermore, the following icons are used in the editing mode:
Symbol for the setup
Symbol for the Expert setup
Symbol for diagnostics
Accept entry.
If this icon is selected, the information entered is accepted at the position and the user exits the editing
mode.
Reject entry.
If this icon is selected, the information entered is rejected and the user exits the editing mode. The text
configured beforehand remains unchanged.
Move one position to the left.
If this icon is selected, the cursor moves one position to the left.
Delete back.
If this icon is selected, the character to the left of the cursor is deleted.
Delete all.
If this icon is selected, all the information entered is deleted.
6.4

Quick guide to the operating matrix

The following tables show all menus and the operating functions.
Display menu
 AI1 Reset minmax*
 AI2 Reset minmax*
 CV1 Reset minmax*
*) Is only displayed if "Allow reset" = "Yes" is set in the "Expert" menu for the corresponding channel.
Endress+Hauser
, the measured value is not displayed
Description
Reset the min/max values for Analog in 1
Reset the min/max values for Analog in 2
Reset the min/max values for Calc value 1
Operation
41