Scope Of Delivery; Certificates And Approvals; Installation; Incoming Acceptance, Transport, Storage - Endress+Hauser Ria45 Kurzanleitung

Installation

3.2

Scope of delivery

The scope of delivery of the process indicator comprises:
• Panel meter for panel mounting
• Hard copy of Brief Operating Instructions and Ex documentation (XA)
• Fastening material
• Distance piece for terminals (Ex option)
Please note the device accessories in Section 'Accessories' of the Operating Instructions.
3.3

Certificates and approvals

CE mark, Declaration of Conformity
The device is designed to meet state-of-the-art safety requirements, has been tested and left
the factory in a condition in which it is safe to operate. The device meets the relevant
standards and directives as per EN 61 010-1 "Safety requirements for electrical equipment for
measurement, control and laboratory use".
Thus, the device described in these Operating Instructions meets the legal requirements of the
EU directives. The manufacturer confirms successful testing of the device by affixing to it the
CE mark.
An overview of all the certificates and approvals available can be found in the Section
"Technical data" in the Operating Instructions.
4 Installation
4.1

Incoming acceptance, transport, storage

The permitted ambient and storage conditions must be observed. The precise specifications
can be found in Section 10 "Technical data" in the Operating Instructions.
4.1.1

Incoming acceptance

On receipt of the goods, check the following points:
• Are the packaging or contents damaged?
• Is anything missing from the delivery? Compare the scope of delivery with the information
you specified in the order.
4.1.2

Transportation and storage

Note the following points:
• Pack the device so that is protected against impact for storage and transportation. The
original packaging provides optimum protection.
• The permitted storage temperature range is –40 to 85 °C (–40 to 185 °F); it is possible to
store the device in the limit temperature ranges for a limited period (maximum 48 hours).
30
RIA45
Endress+Hauser