Endress+Hauser RIA45 Kurzanleitung Seite 42

Operation
Display menu
 CV2 Reset minmax*

Analog in 1
 Analog in 2

Calc value 1
 Calc value 2

Contrast
 Brightness

Alternating time
 Back
*) Is only displayed if "Allow reset" = "Yes" is set in the "Expert" menu for the corresponding channel.
Setup menu
 Application
1-channel
2-channel
Diff-pressure

AI1 Lower range*
 AI1 Upper range*

AI2 Lower range*
 AI2 Upper range*

CV Factor*
 CV Unit*

CV Bar 0%*
 CV Bar 100%*

Linearization*
No lin points
X-value
Y-value

Analog in 1
Signal type
Signal range
Connection
*) Is only displayed if "Application" = "Diff pressure" is configured.
42
Description
Reset the min/max values for Calc value 2
Display setting for Analog in 1
Display setting for Analog in 2
Display setting for Calc value 1
Display setting for Calc value 2
Display contrast
Display brightness
Switchover time between values chosen to be displayed
Return to main menu
Description
Application selection
1-channel application
2-channel application
Difference pressure application
Lower measuring range limit for Analog in 1
Upper measuring range limit for Analog in 1
Lower measuring range limit for Analog in 2
Upper measuring range limit for Analog in 2
Factor for calculated value
Unit for calculated value
Lower limit for bargraph of calculated value
Upper limit for bargraph of calculated value
Linearization of calculated value
Number of linearization points
X-values for linearization points
Y-values for linearization points
Analog input 1
Signal type
Signal range
Connection type (only for Signal type = RTD)
RIA45
Endress+Hauser