Sentiotec WAVE.COM4 SOUND & LIGHT Montage- Und Gebrauchsanweisungen Seite 33

Instructions for use for the user
4. The current colour transition time in seconds and the symbols
flash.
a
5. With the keys
shortened. Each change of colour the occurs with this programmed time.
6. By pressing the key
gramming.
PROGRAMMING COLOURS
The coloured lamp mixes the desired chroma from the 3 LED-base colours (Red-
Green-Blue). This mix can be programmed. This gives the customer the option
of programming his personal colours behind the colour numbers. Range of the
individual components of the colour is always 0 to 20 (5 % steps)
1. On the operating element with the MODE key
2. Press keys
(NB: do not change the colour number in the process!)
3. The programmed RED – portion of the chroma flashes in the display.
4. Changeable with
5. The programmed GREEN – portion of the chroma flashes in the display.
6. Changeable with
7. The programmed BLUE – portion of the chroma flashes in the display.
8. Changeable with
On completion of all inputs, the control is again in "Manual" mode.
MASTER / SLAVE PROGRAMMING
Here you can set to decide whether the operating element is used in the
● Single/Master operation
● Selection „SIN", (=standard setting,) without Wave.com4 sauna base section
as master
● Setting for pure colourLEDcontrol without sauna function
WORLD OF WELLNESS
and , the colour transition period is extended or
5 6
once, confirm the input and thus leave the pro-
7
and together and simultaneously for approx. 3 sec.
5 6
and and with the MODE key
5 6
and and with the MODE key
5 6
and and with the MODE key
5 6
, go into "Manual" mode.
7
confirm the input.
7
confirm the input.
7
confirm the input.
7
p. 13/20
and
9
EN