Scheppach HS700GE Anleitung Seite 21

Assembly
For packaging reasons your machine is not completely
assembled.
Please check for completeness of parts when unpacking.
Packing List
machine
axis with wheels
Rocker extension
saw blade changing tool
Equipment pack
User's manual
Mounting the wheels, Fig. 2
Attach the two wheels to the wheel axle and secure them
using a splint. Bend the splint slightly open to prevent
it from falling off.
Mounting the rocker extension, Fig. 3
Insert the rocker extension (19) in the opening on the
rocker's left side and adjust it so that the firewood can be
well positioned. Afterwards, fasten the rocker extension
using the adjustment screw (15).
Transport, Fig. 4-5
The engine must be switched off during transport, other-
wise it might be damaged and there is also a risk of
injury.
Move the rocker into the transport position and secure it
with the locking lever (fig 4, 20).
Tilt the saw slightly towards yourself in order to facilitate
the shifting of the saw in another place (fig. 5).
Caution! The saw may only be operated when all 4 feet
are firmly placed on the floor.
Note!
For workplace safety, protect from tipping or shifting by
securing the saw with screws or bolts to the floor.
21