Mennekes Basic 3,7 Betriebs Und Installationsanleitung Seite 47

T
T
ATTENTION
Risk of property damage as a result of incorrect handling!
Removing the key in position "I" may damage the lock.
f Before removing the key, turn the key to position "0"
f Remove the key.
Terminating the charging process
T
T
ATTENTION
Damage to the charging cable
Pulling the cable may cause cable breaks and other
damages.
f Remove the charging cable only by pulling the plug
from the charging socket.
f To stop the charging process, remove the charging
cable by slowly unplugging the plug from the charging
socket.
f Remove the charging cable from the vehicle.
Slowly removing the plug de-energises the
charging socket before disconnecting the plug
contacts.
Power failure during charging process
A power failure aborts the charging process. The plug can
be removed.
8. Maintenance
The tasks described in this section may only be
carried out by a qualified electrician.
T
T
DANGER
Electric shock hazard when devices are damaged
Use of a damaged device may result in electric shock.
f Do not use the device if it is damaged.
f Mark the damaged device to ensure that no one
continues using it.
f Eliminate damage immediately.
f Stop the device if necessary.
Opening the Charging Column
The charging column must be opened for some
maintenance and repair work.
Î "5.2.5 Opening the Charging Column"
Unfolding the swing frame
Folding out the swing frame is required for some
maintenance and repair work.
T
T
CAUTION
Risk of injury when moving the swing frame!
There are areas between the edge of the enclosure and
the pivoted frame where there is a risk of injury from
crushing or cutting.
f Do not reach into swing range between enclosure edge
and swing frame!
EN
19