Mennekes Basic 3,7 Betriebs Und Installationsanleitung Seite 46

T
T
ATTENTION
Risk of property damage as a result of incorrect hand-
ling!
Removing the key in position "I" may damage the lock.
f Before removing the key, turn the key to position "0"
f Remove the key.
Terminating the charging process
T
T
ATTENTION
Damage to the charging cable
Pulling the cable may cause cable breaks and other
damages.
f Remove the charging cable only by pulling the plug
from the charging socket.
f Terminate the charging process at the vehicle.
f Remove the charging cable by pulling the plug from the
charging socket.
f Remove the charging cable from the vehicle.
Power failure during charging process
A power failure aborts the charging process.
The charging plug inserted into the charging socket of the
charging station is released and can be removed.
If the charging plug cannot be removed from the charging
station, an actuator has interlocked the charging plug
mechanically.
Î "9. Troubleshooting"
18
7.2 Charging mode 1 (only Basic S 22)
T
T
WARNING
Risk of injury by unsuitable aids
Use of adapter plugs, extensions, or additional charging
cables in connection with the device can result in electric
shock or cable fire.
f Use only the charging cable intended for the vehicle
and the device.
f Do not use adapter plugs, extensions, or additional
charging cables to charge the vehicle.
Fig.: 20. Charging mode 1
Starting the charging process
f Connect the charging cable to the vehicle.
f Insert the plug fully into the charging socket SCHUKO®
of the charging station.
f Insert the key.
f Activate the key-operated push-button.
The system can be activated also with an external
transducer (e.g. pay and display ticket machine).
The charging system supplies a maximum charging current
of 13 A.
9 The contactor is activated.
The plug is not mechanically locked. The vehicle can
9
now be charged.