Siemens SIPROTEC 5 Handbuch Seite 195

Parameter Loading
(Station-specific parameter, mark X if function is only used in the standard direction, R if only used in the
reverse direction, and B if used in both directions)
Threshold value
Smoothing factor
Low limit for transmission of measured values
High limit for transmission of measured values
Parameter Activation
(Station-specific parameter, mark X if function is only used in the standard direction, R if only used in the
reverse direction, and B if used in both directions)
Act/deact of persistent cyclic or periodic transmission of the addressed object
Test Procedure
(Station-specific parameter, mark X if function is only used in the standard direction, R if only used in the
reverse direction, and B if used in both directions)
Test procedure
File Transfer
(Station-specific parameter, mark X if function is used)
File transfer in monitor direction
Transparent file
Transmission of disturbance data of protection equipment
Transmission of sequences of events
Transmission of sequences of recorded analog
File transfer in control direction
Transparent file
Background Scan
(Station-specific parameter, mark X if function is only used in the standard direction, R if only used in the
reverse direction, and B if used in both directions)
Background scan
Acquisition of Transmission Delay
(Station-specific parameter, mark X if function is only used in the standard direction, R if only used in the
reverse direction, and B if used in both directions)
Acquisition of transmission delay (not supported)
Definition of Time Outs
Parameter
t
0
t
1
SIPROTEC 5, Communication Protocols, Handbuch
C53000-L1800-C055-H, Ausgabe 07.2023
Default Value Remarks
30 s Time-out of connection establishment
15 s Time-out of send or test APDUs
IEC 60870-5-104
4.3 Interoperabilität
Selected Value
Fixed
Configurable
195