Siemens SIPROTEC 5 Handbuch Seite 194

IEC 60870-5-104
4.3 Interoperabilität
Clock Synchronization
(Station-specific parameter, mark X if function is only used in the standard direction, R if only used in the
reverse direction, and B if used in both directions)
Clock synchronisation
Day of week used
RES1, GEN (time tag substituted/ not substituted) used
SU-bit (summertime) used
Command Transmission
(Station-specific parameter, mark X if function is only used in the standard direction, R if only used in the
reverse direction, and B if used in both directions)
Direct command transmission
Direct set point command transmission
Select and execute command
Select and execute set point command
C_SE ACTTERM used
No additional definition
Short pulse duration (duration determined by a system parameter in the outstation)
Long pulse duration (duration determined by a system parameter in the outstation)
Persistent output
Supervision of maximum delay in command direction of commands and set point commands
Maximum allowable delay of commands and set point commands
Transmission of Integrated Totals
(Station-specific parameter, mark X if function is only used in the standard direction, R if only used in the
reverse direction, and B if used in both directions)
Mode A: Local freeze with spontaneous transmission
Mode B: Local freeze with counter interrogation
Mode C: Freeze and transmit by counter-interrogation commands
Mode D: Freeze by counter-interrogation command, frozen values reported spontaneously
Counter read
Counter freeze without reset
Counter freeze with reset
Counter reset
General request counter
Request counter group 1
Request counter group 2
Request counter group 3
Request counter group 4
194 SIPROTEC 5, Communication Protocols, Handbuch
C53000-L1800-C055-H, Ausgabe 07.2023