Siemens SIPROTEC 5 Handbuch Seite 191

<112> = Parameter of measured value, short floating-point value
<113> = Parameter activation
File Transfer
(Station-specific parameter, mark each Type ID X if it is only used in the standard direction, R if only used in
the reverse direction, and B if used in both directions)
<120> = File ready
<121> = Section ready
<122> = Call directory, select file, call file, call section
<123> = Last section, last segment
<124> = Ack file, ack section
<125> = Segment
<126> = Directory {blank or X, only available in monitor (standard) direction}.
Type Identifier and Cause of Transmission Assignments
(Station-specific parameters)
Shaded boxes are not required.
Blank: functions or ASDU not used.
Mark Type Identification/Cause of transmission combinations:
X if only used in the standard direction
R if only used in the reverse direction
B if used in both directions
SIPROTEC 5, Communication Protocols, Handbuch
C53000-L1800-C055-H, Ausgabe 07.2023
IEC 60870-5-104
4.3 Interoperabilität
P_ME_NC_1
P_AC_NA_1
F_FR_NA_1
F_SR_NA_1
F_SC_NA_1
F_LS_NA_1
F_AF_NA_1
F_SG_NA_1
F_DR_TA_1
191