Werbung
Problem
The shaving sensor
does not respond.
ES-LV9N_EU.indb
25
Action
Depending on the beard
thickness or the amount of beard
trimmings in the shaver head,
the shaving sensor may not
react and the driving sound may
not change. This is not abnormal.
The shaving sensor may not
respond depending on the type
and quantity of the shaving gel.
This is not abnormal.
The shaving sensor may not
respond when the remaining
battery capacity is low. If this
happens, recharge the shaver.
Apply oil. (See page 18.)
The shaving sensor may not
respond when there is not
enough oil on the blades.
Problem
Clean the beard trimmings from
the shaver.
When the shaver is extremely
dirty, remove the foil frame and
wash with water.
(See page 18.)
The shaving sensor
responds even though
Replace the system outer foil
the shaver is not in
and/or inner blades.
contact with the skin.
Expected life of system outer
foil and inner blades:
System outer foil:
Inner blades:
Apply oil.
When the number of operations
Operating time is short
per charge starts to decrease,
even after charging.
the battery is nearing the end of
its life.
The appliance may not operate
in an ambient temperature
approximately 5 °C or lower.
The battery has reached the
Shaver does not operate
end of its life.
even after charging.
The shaver will not operate with
the AC adaptor connected.
Please use the shaver after it has
been sufficiently charged and the
AC adaptor disconnected.
Action
Approximately 1 year
Approximately 2 years
25
2015/12/11
13:05:59
Werbung
