Werbung
Cleaning, drying, charging
We recommend cleaning the shaver after each use.
1
Insert the shaver into the
self-cleaning recharger [B]
and plug the adaptor [C]
into a household outlet.
(See page 12.)
• Check that the charge status
lamp (
) is glowing.
• When the LOW lamp or the
STATUS lamp lights up, see page
21.
2
Press
.
The CLEAN lamp and the DRY lamp glow, and the "AUTO"
mode will start after approximately 6 seconds.
• It is not possible to change the mode after the "AUTO"
mode has started.
Clean
10 min
* When the ambient temperature of the self‑cleaning
recharger is low (approx. 15 °C or lower), the drying
process will take up to 170 min.
3
Remove the adaptor after the selected mode is
completed.
ES-LV9N_EU.indb
17
1
1
2
Dry
Charge
80 min*
0 to 60 min
Clean the shaver with water or with the
cleaning brush once per month.
(See pages 18 and 19.)
The main unit neck section (a), inner blade
attachment part (b), trimmer, system outer foil
gaps, etc. cannot be cleaned with the self‑
cleaning recharger.
Changing the mode of self-cleaning recharger
The "Charge" mode starts when attaching the shaver, and the
mode can be changed by pressing the SELECT button.
Charge mode
AUTO mode
(Charge)
(Clean/Dry/Charge)
Notes
• Do not press the cleaning liquid unit removal button during
cleaning as the cleaning liquid may spill causing a malfunction.
• The drying time may increase in an ambient temperature
approximately 15 °C or lower.
The Clean or Dry function may not operate under extreme
low temperatures (approximately 0 °C or lower).
• A lubricant constituent is included in the detergent, so
smooth shave is maintained without applying oil.
Dry/Charge
mode
(Dry/Charge)
17
2015/12/11
13:05:56
Werbung
