Werbung
Problem
Cleaning liquid leaked
from the cleaning liquid
unit.
The cleaning liquid unit
cannot be removed.
The mode does not start.
24
ES-LV9N_EU.indb
24
Action
Do not press the cleaning liquid
unit removal button during any
mode.
Place the self‑cleaning
recharger horizontally.
If you use the self‑cleaning
recharger when the shaver is
wet or when soap or shaving
gel is on the shaver, cleaning
liquid may leak.
Place the self‑cleaning
recharger on a hard, flat surface.
(See page 14.)
Check that the AC adaptor is
connected to the self‑cleaning
recharger, and that the adaptor
is plugged in to a household
outlet. (See page 17.)
Confirm that the shaver is
properly attached to the self‑
cleaning recharger.
(See page 17.)
The Clean or Dry function may
not operate under extreme low
temperatures (approximately
0 °C or lower).
Check if the STATUS lamp is
glowing. (See page 21.)
Problem
Gently wipe the main body rear
terminals and the charging
The shaver cannot be
terminals of the self‑cleaning
charged.
recharger with a cloth or tissue
dampened with water.
During cleaning:
After cleaning:
Makes a loud sound.
The sound after cleaning is
different from the sound during
cleaning. The water level has
dropped and it is removing
water droplets from the blades
after cleaning. This does not
indicate a problem.
►Shaver
Problem
The power switch does
Unlock the switch lock.
not turn ON.
(See page 16.)
The clean lamp (
)
Please clean the blades with the
glows.
self‑cleaning recharger or the
(It turns off in about
sonic vibration cleaning mode.
1 minute.)
Action
The self‑cleaning recharger
makes a loud sound due to
the cleaning of the blades.
The self‑cleaning recharger
makes a loud sound due to
the removal of water droplets
in order to speed drying.
Action
2015/12/11
13:05:58
Werbung
