Operation Ct-1500Pb - VOLTCRAFT 20 00 80 (CT-8000Pb) Bedienungsanleitung

Operation CT-1500Pb

Connect the mains plug of the charging station with a suitable mains socket and turn
on the device.
Without a connected accumulator, the ready for operation display appears together
with the ambient temperature.
"CHARGE TERMINAL
" 22° C
Place the temperature sensor in the proximity of the accumulator. Avoid direct sun-
light on the device, the temperature sensor and the accumulator.
If an accumulator is not connected, you can set the language (German or English)
and the display contrast. The corresponding selection is to be confirmed by pressing
the OK button.
"LANGUAGE
"1. GERMAN
"2. ENGLISH
"CONTRAST
"1. HIGH
"2. MID
"3. LOW
Now, connect the accumulator terminals with the correct polarity.
Connect the red terminal with the positive terminal and the black terminal with the
negative terminal of the accumulator.
If you have short-circuited the two terminals, the following message will be displayed
"AUTO DETECTION
"- SHORT CIRCUIT
The false connection of the accumulator will be signalised by the message
"AUTO DETECTION
"- CHECK POLARITY "
Depending on the applied voltage, the device recommends a cell number. Neverthe-
less, the actual cell number can deviate from the recommended one if the accumula-
tor has been significantly discharged or newly charged.
32
"
"
"
"
"
"
"
"
"
"
"
"