Behringer MS-1 Schnellstartanleitung Seite 83

MIDI SysEx Messages
The following data format is used when creating a SysEx message, and the various items in this SysEx data string are described below:
Frame start Manu ID
F0 00 20 32
Item (Hex) Description
00 20 32 Manufacturer SysEX ID number (Behringer GmbH)
aa bb cc Device ID: 00 01 20 for MS-1
dd It is a main packet type (abbr. PKT).
ee It is a sub packet type (abbr. SPKT). SPKT is absent for some packets.
D ... D Parameter value.
0 n-
1
Name Command
Set MIDI Channel F0 00 20 32 00 01 20 0E D0~D2 F7
Set Velocity Information F0 00 20 32 00 01 20 10 D0~D2 F7
Set Pitch Bend Range F0 00 20 32 00 01 20 11 D0 D1 F7
Set MIDI Clock F0 00 20 32 00 01 20 17 D0 F7
Set Sequencer F0 00 20 32 00 01 20 1D D0 F7
Auto Play
Set Clock Source F0 00 20 32 00 01 20 1B D0 F7
Set Clock Type F0 00 20 32 00 01 20 1A D0 F7
Set Clock Edge F0 00 20 32 00 01 20 19 D0 F7
Set Accent Threshold F0 00 20 32 00 01 20 1C D0 F7
Get Sequencer Data F0 00 20 32 00 01 20 77 D0 D1 F7
Set Sequencer Data F0 00 20 32 00 01 20 78 D0~Dn F7
Get Configurate Parameters F0 00 20 32 00 01 20 75 F7
Set Configurate Parameters F0 00 20 32 00 01 20 76 D0~D13 F7
Restore Factory Setting F0 00 20 32 00 01 20 7D F7
Device ID PKT
aa bb cc dd
Para range(D0 ... D
D0: Fixed value 0x01
D1: The value of MIDI out channel is 0x00~0x0F → Channel 1~16
Default Value: 0x00
D2: The value of MIDI in channel is 0x00~0x0F → Channel 1~16
Default Value: 0x00
D0: The value of note on velocity is 0x00~0x7F → 1~127 is a fixed value of velocity, 0 is dynamic velocity.
Default Value: 0x00
D1: The value of note off velocity is 0x00~0x7F → 1~127 is a fixed value of velocity, 0 is dynamic velocity.
Default Value: 0x00
D2: The value of velocity curve is 0x00~0x02 → 0-Soft, 1-Med, 2-Hard
Default Value: 0x00
D0: The value of pitch bend range is 0x00~0x0C → Semitones 0~12
Default Value: 0x0C
D1: Fixed value 0x00
D0: 0x00 → Disable / 0x01 → Enable
Default Value: 0x00
D0: 0x00 → Disable / 0x01 → Enable
Default Value: 0x01
D0: The value of clock source is 0x00~0x04 →
0x00: INT
0x01: MIDI
0x02: USB
0x03: EXT
0x04: AUTO
Default Value: 0x00
D0: The value of clock type is 0x00~0x03 →
0x00: 1PPS
0x01: 2PPQ
0x02: 24PPQN
0x03: 48PPQN
Default Value: 0x00
D0: The value of clock edge is 0x00~0x01 →
0x00: FALL
0x01: RISE
Default Value: 0x00
D0: Enable value 00~7E
Disable value 7F
Default Value: 0x60
D0: The value of bank number is 0x00~0x07 → Bank 1~8
D1: The value of pattern number is 0x00~0x07 → Pattern 1~8
D0: The value of bank number is 0x00~0x07 → Bank 1~8
D1: The value of pattern number is 0x00~0x07 → Pattern 1~8
D2~D : Sequencer data.
n
NA
D0~D2: MIDI channel select
D3~D5: Velocity select
D6~D7: Pitch bend select
D8: MIDI clock enable control
D9: Sequencer auto play enable control
D10: Clock source select
D11: Clock type select
D12: Clock edge select
D13: Accent threshold select
NA
SPKT Parameter Frame end
ee D0 ... Dn-1 F7
)
n
83
Quick Start Guide