Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Service Manual- SC370
Removal and Installation
Squeegee assembly
Installation
Push the machine to a level floor.
1.
Ensure that the machine is off.
2.
Lower the brush/pad-holder deck by lifting the pedal.
3.
Place squeegee in the place between brush deck and front wheel.
4.
Fix stud (A) to the opening (B), then fix another screw (D) to the opening (C) and fasten the knob.
5.
Connect the vacuum hose (F) to the connector (E).
6.
Removal
Disassemble components in reverse order of assembly.
B
C
A
E
D
F
38 Squeegee System 49
Werbung
