Nilfisk SC370 43B Wartungshandbuch Seite 29

Service Manual- SC370
24 Electrical System 28
7. Remove 2 screws, then remove the cover of distribution box (Figure 9).
8. Remove 2 screws, then remove the AC plug cover (Figure 10).
9. Pull out the charger AC plug (Figure 11).
10. Disconnect the charger output connector (Figure 12).
11. Remove 5 screws fixing the charger and take out the charger (Figure 13)
Installation
Assemble components in reverse order of disassembly
AC plug cover
Remove 2 screws
Remove 2 screws
Figure 10
Figure 9
Charger AC plug
Output connector
Figure 12
Figure 11
Remove 5 screws
Figure 13