Carromco TOPAZ-901 Bedienungsanleitung Seite 20

No power
Game will not
score
Stuck
segment or
button
Removing
broken tips
Power or
electro-
magnetic
interference
Warranty void if dartboard has been opened/ dismantled.
WARNING!
The supply-terminals are not to be short circuited.
Only use recommended adapter (see mounting instructions). Adapter is not a toy!
Avoid dartboard being subjected to extreme weather or temperature. Avoid
dartboard being subjected to liquid or excessive moisture. Clean dartboard with
damp cloth and/or mild detergent only.
Please disconnect the dartboard from the power supply before cleaning
Examine regularly adapter for any damage to their cord, plug, enclosure and other
parts. In the event of such damage, don`t use the dartboard until the damage has
been repaired.
TROUBLE SHOOTING
Please check and make sure the adapter is properly plugged
in to the electrical outlet, and the plug is properly connected to
the board.
Check to see if the game is in the setup mode or if the game
is on hold or in the middle of score checking. Push the
RESET button for 2 seconds to see if the game will reset and
re-start playing. You may also check to see if any scoring
segments or function buttons are being stuck.
During shipping or in the course of normal play, it is possible
for the scoring segments to become temporarily stuck. If such
a situation happens, all automated scoring functions will
cease. By gently removing the dart or by wiggling the segment
with your finger, you will be able to free the segment. The
game may then be resumed and scoring functions will be
back to normal.
Soft-Tips may break and remain in the board. In this case, try
to pull them out gently with a pair of pliers. Note: the heavier
the dart, the higher the chance of bending or breaking tip. You
shall use the same kind of soft tips as those come with the
game. Never use longer tips for this game.They break or
crook more easily.
Should there be an electromagnetic interference, the
electronics of the dartboard may possibly show erratic
behavior or fail to continue working. (For example: a heavy
thunderstorm, a power line surge, a rolling brown out, or too
close proximity to an electrical motor or microwave.) To
restore the game to normal operation, take out the power
adaptor from the electrical outlet and the dartboard for 2
seconds.
SAFETY-NOTICE
18