Instructions On Environmental Protection - Wilfa Innobot Rvc-D4000Sl Anleitung

INNOBOT · RVC-D4000SL+, RVC-D4000SL, RVC-D4000AI

INSTRUCTIONS ON ENVIRONMENTAL PROTECTION

The following information is only applicable when
discarding this robot, and is not a daily operation
instruction:
Chemical substances contained in the built-in
lithium-ion battery of this product will pollute the
environment. Please remove the battery before you
discard the machine, and hand it over to a professional
battery recycling station for centralized disposal.
Steps to disassemble the battery:
1. Let the robot run until it is low in power and cannot
be cleaned without touching the auto-clean base.
2. Turn the robot off.
3. Disassemble the bottom shell of the robot.
4. Press the buckle and pull out the connector plug
of the battery, then take out the battery.
5. Remove the battery cover plate and take the
battery out.
NOTE:
• When disassembling the battery, make sure that
the battery is exhausted and operated away from
the base.
9
EN