Wilfa INNOBOT RVC-D4000SL Anleitung Seite 19

INNOBOT · RVC-D4000SL+, RVC-D4000SL, RVC-D4000AI
Note:
• It is recommended to clean the dust box at least once a week. Dry the dust
box and filter screen before use (at least 24 hours)
• Do not wash the dust box with water, it can damage electric components.
VIBRATING WATER TANK
1. As shown in the figure, press the tank fastener down, and draw the tank out
horizontally.
2. Turn the plastic tank cover, discharge any residual water in it and mount the
cover in place.
3. As shown in the figure, mount the tank properly.
SIDE BRUSH
1. Turn the robot over and remove the side brush fixing screws.
2. Remove and clean the side brush.
3. Reinstall the side brush and tighten the screws.
19
EN