Battery And Charging - Wilfa Innobot Rvc-D4000Sl Anleitung

• Do not turn the machine upside down on the
EN
ground for a long time.
• If products need to be transported, please make
sure that the machine is turned off, and it is
recommended to use the original packaging box
for packaging protection.

BATTERY AND CHARGING

• Do not use any third-party battery, power cord or
base.
• Do not disassemble, repair or modify the battery
or base without permission.
• Do not place the auto-clean base near the heat
source (such as radiator, etc.).
• Before scrapping the machine, the power supply
must be disconnected, and the battery should be
taken out of the machine.
• If it is not used for a long time, please turn off the
machine after being fully charged and put it in a
cool and dry place.
• It is recommended to charge at least once a
month.
INSTRUCTION MANUAL · ROBOT VACUUM
8