Wilfa INNOBOT RVC-D4000SL Anleitung Seite 16

MOPPING MODE
1. Insert the mop along the slot of the mop holder and stick it on the hook and
EN
loop fastener.
Mop holder
Hook and loop
fastener
2. Open the water tank cover, fill the water tank and then fasten the water tank
cover.
Note:
• Do not use detergents, disinfectants, solid cleaners or other cleaning
products, or inject hot water into the water tank in case of corrosion and
damage to the water tank.
• It is forbidden to shower or soak the water tank; The water tank metal pole
should be dry before performing a mopping task.
3. Push the water tank into the bottom of the robot, and it will make a "click"
sound when it is installed in place.
Note:
• When mopping the floor, please set up virtual walls or forbidden zones in the
carpet area.
• Before starting sweeping/mopping function, be sure to remove any water
accumulated on the floor.
INSTRUCTION MANUAL · ROBOT VACUUM
Mop
Water tank metal pole
16