Technical Data - Meec tools 024240 Bedienungsanleitung

EN
treatment agents. Materials that contain
asbestos should only be handled by qualified
personnel.
• Always use dust extraction.
• Make sure the work area is well ventilated.
• Wear a dust filter mask.
• Always follow the instructions for the
actual material.
SYMBOLS
Read the instructions.
Wear a dust filter mask.
Safety class II.
Wear safety gloves.
Wear ear protection.
Wear safety glasses.
Approved in accordance with
the relevant directives.
Recycle discarded product
in accordance with local
regulations.

TECHNICAL DATA

Rated voltage
Power
Nominal speed
Sandpaper size
Cord length
Weight
Sound pressure level, LpA 77.4 dB(A), K= 3 dB
Sound power level, LwA
Vibration level
20
230 V ~ 50 Hz
200 W
13000 rpm
140x140x90 mm
2,8 m
1.1 kg
88.4 dB(A), K=3 dB
1.879 m/s , K=1.5 m/s
2
WARNING!
The actual vibration and noise level when
using tools may differ from the specified
maximum value, depending on how the
tool is used and the material. It is therefore
necessary to determine which safety
precautions are required to protect the user,
based on an estimate of exposure in actual
operating conditions (taking into account all
stages of the work cycle, e.g. the time when
the tool is switched off and when it is idling,
in addition to the start-up time).
IMPORTANT:
Always wear ear protection!
The declared values for vibration and noise,
which have been measured according to a
standardised test method, can be used to
compare different tools with each other and
for a preliminary assessment of exposure. The
measurement values have been determined in
accordance with EN 62841-2-4:2014.
DESCRIPTION
PARTS
1. Sanding pad
2. Power switch
3. Connection for dust extraction device
4. Rubber coated grip
5. Power cord
6. Dust collector
FIG. 1
CHOICE OF SANDPAPER
Sandpapers can be made with different
abrasive materials and coarseness. Use
sandpaper suitable for the actual material.
2