Other Risks; Technical Data - Meec tools 016078 Bedienungsanleitung

EN
Prompt action can prevent serious
personal injury and material damage.
• Switch off the power tool and unplug it
from the power supply in the event of a
fault. Make sure the power tool is checked
by a qualified professional, and if
necessary repaired, before using it again.

OTHER RISKS

Even if you use this power tool in accordance
with all the safety instructions, there is still a
risk of personal injury and other damage.
The following hazards related to the design and
construction of this power tool can occur:
• Effects on health from vibration if the tool
is used for long periods, or is not handled
and maintained correctly.
• Personal injury and material damage as a
result of defective accessories and hitting
hidden objects when using the tool.
• Risk of personal injury and material
damage as a result of ejected objects.
• Damage to lungs (if an effective face mask
is not worn).
• Damage to ears (if effective ear protection
is not worn).
WARNING!
This power tool produces an electromagnetic
field during use. This field can in some
circumstances affect active or passive medical
implants. To reduce the risk of serious or
life-threatening injury, persons with medical
implants are therefore advised to consult
their doctor and the manufacturer of the
implant before using this power tool.
Symbols
The following symbols can be of importance for
how you should use your power tool. Make sure
you understand the symbols and their significance.
32
Read the instructions.
Wear eye and ear protection.
Approved in accordance with
the relevant EU directives.
Recycle as electrical waste.

TECHNICAL DATA

Battery voltage
Speed, no load
Outer diameter of disc
Size
Spindle
Weight
Sound power level, L
wA
Sound pressure level, L
Vibration level, a
,
h AG
Always wear ear protection.
The declared values for vibration and noise, which
have been measured according to a standardised
test method, can be used to compare different
tools with each other and for a preliminary
assessment of exposure. The measurement
values have been determined in accordance
with EN60745-2-3:2011.
WARNING!
The actual vibration and noise level when
using tools may differ from the specified
maximum value, depending on how the
18 V DC
19500 rpm
76 mm
21 x 11 x 14 cm
M14
0.73 kg
78 dB(A), K=3 dB
67 dB(A), K=3 dB
pA
2.5 m/s²
≤