Verify The Installation In The Zaptec Portal - ZAPTEC Pro Installationsanleitung

English

Verify the installation in the Zaptec Portal

Check that all the charging stations have been added to the installation in the
Zaptec Portal, as described in the chapter "Prepare for the installation in the
Zaptec Portal", to make sure that all the charging stations are present.
Test the charging stations
• Perform an RCD test using a testing device with a Type 2 plug. The test
must be performed in accordance with the testing device's manual.
• Carry out a test using an electric vehicle, test load or Mode 3 test
equipment.
Handover and Zaptec Portal access
to the installation owner
Hand over the user manual, SmartKey and final checklist to the owner.
Add the installation owner/owner group to the installation.
• Inform the owner/owner group of the jointly owned property/installation
that they must register as a user in the Zaptec Portal before they can gain
access to the installation.
• Go to Authorisations in the Zaptec Portal, Grant authorisation and add the
user(s) who are to administer the installation as owner. They will only be
visible if they have registered a user profile in the Zaptec Portal.
• Show the Zaptec Portal dashboard to the owner and give a brief
presentation of the functions.
Authorisations in the Zaptec Portal
Administrator:
Gives access to settings, access control, statistics and power
consumption for the installation.
Service:
This is a technical role which gives authorisation to add installations,
circuits and charging stations.
User:
All authenticated users of the installation. They will only be able to see
their own power consumption.
18