Herunterladen Inhalt Inhalt Diese Seite drucken

Operation; Menu Structure - EuroLite LED TSL-1500 Scan Bedienungsanleitung

Scanner mit 150-w-led, rotierenden gobos, 4-facetten-prisma, farbrad und motorfokus
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

OPERATION

The built-in control panel of the unit features four operating buttons and a display which shows all operation
statuses. After connecting the unit to the mains it requires a short initialization process. During the reset, the
motors are trimmed and the device is ready for use afterwards.
The display shortly indicates the firmware version followed by the last operating mode. All settings remain
stored even if the device is disconnected from the mains. The device can be operated in stand-alone mode
via the control board or in DMX-controlled mode via any commercial DMX controller as well as wirelessly via
QuickDMX. The operating modes can be selected manually by means of the display and the control buttons.

Menu structure

Browse through the main menu by pressing Menu. Press Enter in order to select the desired menu item.
You can change the selection by pressing Up or Down. Press Enter in order to confirm. You can leave every
mode by pressing Menu. The functions provided are described in the following sections.
The display shuts off after several seconds of inactivity. By pressing any button it lights up again.
Default shown in gray.
Main menu
DMX Address
001~ 512
DMX Channel
DMX 13 CH
DMX
Auto
Running Mode
Sound
Manual
Test
Auto Programs
Program 1 ~ Program 9
Manual Mode
Pan, Tilt, P/T SpeedV
Pan Invert
Tilt Invert
Display Invert
Backlight
Settings
Sensitivity
DMX Fail
Calibration
Factory Reset
Reset Motor
Software V X.XX
System Info
Mode XXX
Address 001
Sub menu
DMX address setting
DMX channel mode
DMX mode
Auto mode
Sound control
Manual setting
Automatic run
Auto programs
Manual setting of operating parameters
YES
PAN reverse
NO
YES
TILT reverse
NO
YES
Display reverse
NO
ON
Display shutoff
OFF
000-50-100
Microphone sensitivity
OFF
Action if no DMX
HOLD
Service only
YES
Reset to factory settings
NO
YES
Motor reset
NO
Shows the current software version
Shows the operating mode
Shows the DMX starting address
26/32
Function
Version 1.0

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

51786127

Inhaltsverzeichnis