Intended Use; Delivery Content; Features And Functions - VOLTCRAFT VC191 Bedienungsanleitung

3. Intended use

The product is intended to be used as a digital multimeter (DMM), measured values are shown
on a digital display. The DMM can be used for professional, industrial and do-it-yourself applica-
tions up to CAT III. It is intended for indoor use only. Contact with moisture must be avoided
under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged. In
addition, improper use can result in short circuits, fires, electric shocks or other hazards. Read
the instructions carefully and store them in a safe place. Make this product available to third
parties only together with its operating instructions.
All company names and product names are trademarks of their respective owners. All rights
reserved.

4. Delivery content

• Digital multimeter
• Test leads (pair)
• Point contact temperature probe

5. Features and functions

• AC / DC voltage measurement
• AC / DC current measurement up to 10 A.
• Duty cycle
• Diode test
• Acoustic continuity tester
• Hold function
• Auto power off.
• Backlight
• 9 V block battery
• Operating instructions
• Peak reading (PEAK)
• 6000 counts
• True RMS
• Auto range
• 600 V high performance fuses
• CAT III 600 V measuring category
• Torch
41