DeWalt DCG200T2 Bersetzung Der Originalanweisungen Seite 31

WALL CHASER
DCG200
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Battery type
No-load/rated speed
Diamond wheel diameter
Diamond wheel thickness (max.)
Bore diameter of diamond wheel
Cutting depth (max.)
Groove width (max.)
Spindle diameter
Wireless tool control transmitter
Frequency Band
Max. Power (EIRP)
Weight (without battery pack)
Noise values and vibration values (triax vector sum) according to EN60745-2-22:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Vibration emission value a =
h
Uncertainty K =
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of work patterns.
EC-Declaration of Conformity
Machinery Directive and Radio Equipment
WALT one of the
e
Directive
DCG200
Wall Chaser
V 54
DCG200
DC
2
D WALT declares that these products described under Technical
e
Data are in compliance with:
Li-Ion
2006/42/EC, EN60745-1:2009+A11:2010,
min -1 9000
EN60745-2-22:2011+A11:2013.
mm
125
These products also comply with Directive 2014/53/EU and
mm 3
2011/65/EU. For more information, please contact D
mm 22.23
the following address or refer to the back of the manual.
mm
32
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
mm 35
M14
MHz 433
Markus Rompel
mW 0.03
Vice-President Engineering, PTE-Europa
kg 3.7
D WALT, Richard-Klinger-Straße 11,
e
65510, Idstein, Germany
10.01.2022
dB(A) 102
dB(A) 113
dB(A) 3
m/s 2 4.7
m/s 2 1.5
WALT declares that these products described under Technical
D
e
Data are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
EN60745-1:2009+A11:2010, EN60745-2-22:2011+A11:2013.
These products conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091
(as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
For more information, please contact D
address or refer to the back of the manual.
WARNING: To reduce the risk of injury, read the
instruction manual.
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
REGULATIONS 2008
Wall Chaser
DCG200
EngLIsh
WALT at
e
WALT.
e
WALT at the following
e
29