Automatic Zero Setting; Zero Range; Taring /Printing At Stability (Models Pbj) - KERN PBS Serie Betriebsanleitung

16.6 Automatic zero setting

(models with non-verifiable setting only)
If the displayed value is within the zero range and the stability display lights up, zero
setting occurs automatically. The zero symbol appears.
To switch-on the zero setting function, select menu symbol 41

16.7 Zero range

The „zero range" is used as a reference value, whether a sample was placed or not.
To determine the zero range, select the menu element 48 .

16.8 Taring /printing at stability (models PBJ)

(only in verifiable units)
Determine if the balance first has to reach stability before printing via the
or the zero point can be displayed via the
If you want to print or to tare without waiting for stability:
(immediate operation)
• Select the menu element 39.
If printing or taring only after having reached stability: (waiting for stability)
• Select the menu element 40.
Notes:
While the balance waits for stability, „----" is displayed.
• Press
button, then „---" appears.
At this opportunity press the
you deactivate this function and want to cancel taring.
• If the communication
you press the
The data are output, when the stability symbol
If during waiting time you press the
mode. Data are printed as soon as in the next weighing process stability has
been reached.
59
button, if
- and the standby
PRINT
button, you have to wait for the stability symbol
button.
symbol are illuminated and
is illuminated.
button, the balance goes to standby
PBS/PBJ-BA-def-2319
button
.