Setting The Display For The Standby Mode - KERN PBS Serie Betriebsanleitung

12.3 Setting the display for the standby mode

Define the items which shall be displayed in standby mode.
Select menu element 65 if the time shall be displayed, see chapter 11.1
Select menu element 66 is the date shall be displayed, see chapter 11.1
Select menu element 67 if neither the time nor the date shall be displayed, see
chapter 11.1
If the time is displayed in standby mode, you have the following functions
available
• Display of seconds
Using
• Correction by ±30 seconds:
Actuate
00 - 29 seconds, the seconds are rounded off to zero. If the value is
between 30 -59 seconds, it is round up by one minute and 00 is displayed
for seconds.
PBS/PBJ-BA-def-2319
you can activate display/hiding of seconds.
while the seconds are displayed. If the value is between
50