15.1 Percentage conversion
Setting 100% of the reference value:
PBS/PBJ-BA-def-2319
In weighing mode, press the
symbol will be seen on the display.
Press the
key to tare the balance.
Put the reference sample which represents 100% value.
This value must correspond to 100 or more counts in „g" unit.
When the stabilisation display
once.
„SET" appears shortly.
The reference sample weight will be shown as 100%.
Weights of next samples will be displayed as a percent value of
the reference sample weight.
key repeatedly until the „%"
appears, press the
key at
54