3.1.2 Setting the decimal point when entering numerical values
Entering a decimal point is necessary only for determining the specific gravity or if a
multiplier shall be defined for the user-defined unit.
• Repeat actuating the
button again in order to call up the decimal point setting mode. The reversed
triangle symbol ▼or the current decimal point flashes.
• Actuate the
position by one digit each.
• Actuate the
message „SEt" which appears for a short period of time indicates that setting
has been completed.
13
PRINT
button until the last digit flashes. Actuate the
button in order to move the decimal point to the required
button to define the position of the decimal point. The
PBS/PBJ-BA-def-2319