Herunterladen Inhalt Inhalt Diese Seite drucken

Scheppach 490 2202 924 Original Anleitungen Seite 5

Abricht- und dickenhobelmaschine
Inhaltsverzeichnis

Werbung

Constructeur:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Cher client,
Nous vous souhaitons beaucoup de plaisir et de succès
avec votre nouvelle machine scheppach.
Remarque
Selon la loi en vigueur sur la responsabilité pour les pro-
duits, le fabricant n'est pas tenu responsable pour tous
endommagements de cet appareil ou tous dommages ré-
sultant de l'exploitation de cet appareil, dans les cas sui-
vants:
Maniement incorrect,
Non respect des instructions de service,
Travaux de réparation réalisés par tiers, par du person-
nel qualifié non autorisé,
Montage et remplacement de pièces de rechange
n'étant pas des pièces d'origine,
Utilisation non conforme,
Pannes de l'installation électrique en cas de non respect
des prescriptions électriques et des dispositions VDE
0100, DIN 57113 / VDE0113.
Conseils :
Lire les instructions de service dans leur intégralité avant
le montage et la mise en route. Ces instructions de service
ont pour but de faciliter l'initiation à la machine et de dé-
crire ses conditions de service réputées conformes.
Les instructions de service contiennent d'importantes
consignes pour un travail sûr, compétent et rentable avec
la machine. Elles indiquent comment éviter des dangers
et des frais inutiles pour des réparations, comment réduire
les temps d'arrêt et comment augmenter la fiabilité et la
durée de vie de la machine.
En plus des consignes de sécurité figurant dans ces ins-
tructions de service, il faut respecter strictement les
prescriptions relatives à l'exploitation de la machine en
vigueur dans le pays respectif. Les instructions de service,
insérées dans un sachet plastique pour les protéger contre
la saleté et l'humidité, doivent être gardées près de la ma-
chine. Elles doivent être lues par chaque opérateur avant
qu'il ne commence à travailler et elles doivent être mi-
nutieusement respectées. Seules des personnes ayant été
instruites sur l'utilisation de la machine et informées des
dangers possibles ont le droit de travailler sur la machine.
Il faut respecter l'âge minimum. En plus des consignes de
sécurité figurant dans les présentes instructions de service
et des prescriptions particulières en vigueur dans votre
pays, il faut respecter les règles techniques généralement
reconnues pour l'utilisation de machines pour le travail du
bois.
Manufacturer:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
we wish you a pleasant and successful working experience
with your new scheppach machine.
Note
According to the applicable product liability law the man-
ufacturer of this device is not liable for damages which
arise on or in connection with this device in case of:
improper handling,
non compliance with the instructions for use,
repairs by third party, non authorized skilled workers,
installation and replacement of non original spare
parts,
improper use,
failures of the electrical system due to the non-
compliance with the electrical specifications and the
VDE 0100, DIN 57113 / VDE 0113 regulations
Recommendations:
Read the entire text of the operating instructions prior to
the assembly and operation of the device. These operating
instructions are intended to make it easier for you to get
familiar with your device and utilize its intended possibili-
ties of use.
The operating instructions contain important notes on how
to work safely, properly and economically with your ma-
chine and how to avoid dangers, save repair costs, reduce
downtime, and increase the reliability and working life of
the machine.
In addition to the safety regulations contained herein, you
must in any case comply with the applicable regulations of
your country with respect to the operation of the machine.
Put the operating instructions in a clear plastic folder to
protect them from dirt and humidity, and store them near
the machine. The instructions must be read and carefully
observed by each operator prior to starting the work. Only
persons who have been trained in the use of the machine
and have been informed on the related dangers and risks
are allowed to use the machine.
The required minimum age must be met. In addition to
the safety notes contained in the present operating in-
structions and the special regulations of your country, the
generally recognized technical rules for the operation of
wood working machines must be observed.
international 5

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Hms 850

Inhaltsverzeichnis